|
DETERMINING
YOUR RING SIZE:
-
Print this page (sizer MUST
measure 3 1/4" long to be accurate.)
-
If the sizer doesn't print to
the correct size, make a pencil mark and measure - use chart below
to figure your size.)
-
Cut-out the ring sizer
(above) as close to edge as possible w/o cutting lines.
-
Place a small piece of clear
tape on the left end
.
-
Stick end w/ tape to bottom side of finger or toe & wrap around
finger or toe.
-
Read your size at the line the arrow points to.
NOTES ON
SIZING:
FINGER:
Be sure sizer is
around the part of finger where you want to ring to fit. Pull snugly
(not overly tight) and read ring size.
TOE:
Rings are often
worn on the 2nd toe (next to the BIG toe) and is usually the same
size as your pinky finger, but you can wear a ring on which ever toe
you like. Measure end of toe first, then measure part of toe where
you want ring to fit. Correct size will be between the two sizes,
tending toward the smaller of the two sizes. The ring should fit
quite snugly over the end of the toe. Using a lubricant such as
Windex or soapy water is very helpful when putting your ring on.
|
Size |
Length |
| 0 = |
1 7/16"L |
| .5 = |
1 15/32"H |
| 1 = |
1 17/32"L |
| 1.5 = |
1 9/16"H |
| 2 = |
1 5/8" L |
| 2.5 = |
1 21/32" H |
| 3 = |
1 23/32" H |
| 3.5 = |
1 25/32" L |
| 4 = |
1 26/32" H |
| 4.5 = |
1 28/32" H |
| 5 = |
1 30/32" L |
| 5.5 = |
1 31/32" H |
| 6 = |
2 1/32" |
| 6.5 = |
2 3/32" L |
| 7 = |
2 4/32" H |
| 7.5 = |
2 6/32" L |
| 8 = |
2 8/32" L |
| 8.5 = |
2 10/32" L |
| 9 = |
2 11/32"
|
| 9.5 = |
2 12/32" H |
| 10 = |
2 14/32" |
| 10.5 = |
2 15/32" H |
| 11 = |
2 17/32" |
| 11.5 = |
2 19/32" L |
| 12 = |
2 20/32" H |
| 12.5 = |
2 22/32" H |
| 13 = |
2 24/32" |
| 13.5 = |
2 26/32" L |
| 14 = |
2 27/32" H |
| 14.5 = |
2 29/32" L |
| 15 = |
2 30/32" H |
| 15.5 = |
3" |
| 16 = |
3 1/32" H |
|
L = light
(just under)
H = heavy
(just over) |
|

All of our name rings and other gifts are hand-crafted. |